How to install vinyl plank flooring?

0
20
How to install vinyl plank flooring?

How to install vinyl plank flooring?

Vinyl flooring is one of the most versatile and beautiful floorings, you can install vinyl flooring in your home, and you get a very durable floor without water problems, like some other floors. You can get a realistic wood look or even a tile or natural stone look with this type of floor, which is cheaper than the actual product and usually performs better. It is warmer than other types of hard floor floors and easier to clean. It is a matter of knowledge to install it on the wooden floor; the following is the basic knowledge of installing the vinyl plank on the wooden floor.

The advantage of using thick planks instead of vinyl is that it is easy to calculate how much you need. Use a tape measure to measure the length and width of the area to be covered. Divide it into rectangles and squares so you can multiply it out. Multiply the length by the width of the area, then add up, and then add 10% for overage. Once you know how much you need, go to the flooring store of your choice. The floor speciality store will be your best choice because they know the floor they are talking about. Choose the style you want and prepare to order. You also need to determine what type of adhesive you need. Some vinyl require a multi-purpose adhesive. Most newer vinyl boards require a pressure-sensitive adhesive. Just make sure that the floor model you ordered is correct.

Bottom Line

Assess the condition of the wood. If the floor is very smooth plywood, then you can install the vinyl directly on it. If it is uneven or wooden slats, you will need to apply 1.4 on top of the foundation. Nail the liner board to the wooden floor, make sure everything is covered, and spread the adhesive on a small area on the floor. If you are using a pressure-sensitive adhesive, you can gently roll it up with a paint roller. If the glue is thicker, you may have to apply it.

Take the board out of the box, but one of the pieces in the adhesive, and press it firmly in the glue. Take another board, press it tightly on the first board, and continue to do this until the floor is covered. When you walk to a wall, you must use a knife to cut the planks into the right shape. Once you put the thick planks in the right place, you should roll them up with a roller to remove any excess adhesive.

Also read: how to stay up all night